You are here
Ammonium measurement achieves energy savings for New Zealand wastewater treatment plants
Accurate dissolved oxygen and nitrification measurement
At a time when municipal and industrial wastewater treatment plants are looking for energy savings – particularly in the light of global warming and extra demand on New Zealand's power resources during winter – a good strategy is to target savings around the aerator operation.
The efficiencies and energy demands of the nitrification and denitrification phase during the purification process will depend on how well the aeration control system is performing – the aerator equipment is the biggest consumer of energy in a biological wastewater treatment plant.
While it is commonly known that nitrifying bacteria (used to convert ammonia to nitrate) require dissolved oxygen, higher concentrations of oxygen will have no effect on the pace of degradation, but end up requiring far higher energy to run the oxygen blowers.
Furthermore the online measurement of the selected parameter of ammonium – which provides the possibility of an NH4-N controlled operation – makes the nitrification process transparent and offers significantly higher potential for energy saving than in a pure O2 controlled operation.
A combined measurement of NH4-N and O2 is suitable for plant operation, as this prevents the formation of bulking sludge in the lower range and limits the oxygen input should interferences occur in NH4-N decomposition (e.g. caused by a disturbed nutrient ratio of carbon : nitrogen : phosphate). This can create significant savings potential as the detected minimum in ammonium concentration occurs prior to the rise in O2 being detected.
Keeping aerator operations to a minimum to reduce energy costs requires precise on-line measuring instruments to ensure efficient and energy saving control of the process.
The modular WTW IQ Sensor Net water quality control system (2020 XT) lets engineers add more modules or sensors at any time, while continuously measuring water quality anywhere in the facility for best process control.
- One cable for power and communication
- Terminals, modules, and sensors can be placed anywhere in the network
- Terminal connects to any module on network
- Connect up to 20 sensors
- Network scales easily without new hardware or engineering
- Smart technology recognises and displays sensors
- Network outputs configurable analogue and digital signals plus relays
- No calibration required on most sensors; automatic drift compensation
- Measures DO, conductivity, temperature, pH, ORP (Redox), nitrate, ammonium, potassium, turbidity, TSS, COD, BOD, SAC, DOC, TOC
- Optical DO sensor is immune to bubbles in the medium with unique design
- Ultrasonic cleaning integrated into turbidity, TSS and UV sensors