Request list

is empty

You are here

GPI GM Series Oval Gear Meters

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

GM Series Oval Gear Meters are designed for low flow and high accuracy. GM Series Meters are great for viscous fluids. Units are available with pulse output from either a Reed Switch or Hall Effect Sensor.

GPI GM Series Oval Gear Meters measure flow in 1/8" to 2" pipes and tube

GM001 - 1/8” Oval Gear Pulse Meter
The GM001 is one of three compact meters in the Oval Gear Meter line. This meter is small and accurate. Choose from either Aluminum or 316 Stainless Steel body materials, both with stainless steel rotors. The GM001 can handle a wide range of fluid viscosities. Available in Aluminum, Stainless Steel, Intermediate Pressure Stainless Steel

GM002 - 1/4” Oval Gear Pulse Meter
The GM002 is one of the small capacity meters in the GM Series line and is differentiated by its flow rate capabilities. It has the ability to handle a wide range of fluid viscosities with exceptional levels of repeatability and durability. Available in Aluminum, PPS, Stainless Steel, High Pressure Stainless Steel, Intermediate Pressure Stainless Steel

GM003 - 1/4” Oval Gear Pulse Meter
The GM003 is another of the GPI compact pulse meters. This 1/4-inch Pulse Meter has an increased flow range and offers the same ability to handle a wide range of fluid viscosities with exceptional levels of repeatability. Available in Aluminum, PPS, Stainless Steel, High Pressure Stainless Steel, Intermediate Pressure Stainless Steel

GM005 - 1/2” Oval Gear Pulse Meter
The GM005 Meter is a low to medium flow range model. The construction of this meter allows for fast and easy servicing while installed. Available in Aluminum and Stainless Steel

GM505 - 1/2” Oval Gear Mechanical Meter
The GM505 is the 1/2 inch Mechanical Meter in the Oval Gear Series. Use this meter with low to medium flow ranges. The GM505 is available in three fitting/ calibration combinations (NPT Gallon, NPT Litre and BSP Litre). Available in Aluminum and Stainless Steel

GM006 - 3/4” Oval Gear Pulse Meter
The GM006 Meter is a low to medium flow range model. This meter is great for lubrication products and fluids compatible with aluminum. Available in Aluminum and Stainless Steel

GM007 - 1” Oval Gear Pulse Meter
Use the GM007 with aggressive chemicals and water. The PPS body and rotor materials provide excellent chemical compatibility in this 1-inch meter. This meter is a great choice when you need a rugged and reliable meter. Available in PPS PPS with Hastalloy C Shafts

GM010 - 1” Oval Gear Pulse Meter
The GM010 Meter is a 1-inch meter available in Aluminum, Bronze and 316 Stainless Steel body materials. Optional 150# ANSI Flanges and Tri-Clover® Fittings are available on the GM010. Available in Aluminum Bronze Stainless Steel

GM510 - 1” Oval Gear Mechanical Meter
The GM510 is a Mechanical Meter available in Aluminum, Bronze and 316 Stainless Steel body materials. Optional 150# ANSI Flanges are available on the GM510. Available in Aluminum, Bronze, Stainless Steel.

GM015 - 1-1/2” Oval Gear Pulse Meter
The GM015 is our medium to large capacity meter with 1-1/2-inch fittings. Optional 150# ANSI Flanges and Tri-Clover® Fittings are available on the GM015. The GM015 can be installed without regard to straight pipe runs making installation easy. Available in Aluminum, Bronze, Stainless Steel.

GM515 - 1-1/2” Oval Gear Mechanical Meter
The GM515 is a medium to large capacity meter with Mechanical Sensor and Display. Optional 150# ANSI Flanges are available on the GM515 model. This meter can handle high viscosity fluids without sacrificing accuracy. Available in Aluminum, Stainless Steel.

GM020 - 2” Oval Gear Pulse Meter
The GM020 is the largest of our GM Series Meters. The fitting size is 2 inches on this large meter. This meter includes NPT or BSP fittings as standard. Choose from four rotor options; PPS is standard Available in Aluminum, Stainless Steel.

GM520 - 2” Oval Gear Mechanical Meter
The GM520 is the Mechanical version of our large capacity meter. Choose from either Aluminum or 316 Stainless Steel body materials. This meter can be mounted horizontally or vertically depending on your application. Available in Aluminum, Stainless Steel.

GPI Flow Meters are available in many formats for your application. Please download and read the attached documentation in order to determine the best flow meter for your application. Reference material is attached about chemical compatibilities.

Ordering Information:
User supplied ordering code.

Video