Request list

is empty

You are here

WMX101 Magnetic Flow Meters

If you cannot find the part number in the documentation please provide detail. Specific to this item, it could include part number or application detail, (ex. 20 meters of cable, or 20 litres of volume)

The WMX101-Series flanged magnetic flow meters are the perfect replacement for your old industrial mechanical turbine or propeller flow meters. Because they have no rotor to stop turning or bearings to wear out the WMX industrial electromagnetic flowmeters are virtually maintenance-free, especially in applications where debris or sand would foul most industrial mechanical flowmeters. WMX101-Series flanged magnetic flow meters are also designed work with minimal straight pipe run requirements, which is great when you have very little space between the meter and an elbow.

Flanged electromagnetic flowmeters for full-pipe municipal or industrial water and wastewater applications.

The WMX101-Series flanged magnetic flow meters’ electronics are housed in a rugged NEMA 4X aluminum enclosure with a 2-line LCD that clearly displays the flow rate and totaliser. The WMX industrial electromagnetic flow meters have a solid state pulse output that allows connection to a variety of devices such as a FT420 remote display, PLC, telemetry system or data logger. A pulse-to-analog converter can be added if a 4-20 mA signal is needed from the magnetic flow meter. The WMX101 industrial electromagnetic flow meters are externally powered from a 12-24 VDC power supply, and their low power requirements make them ideal for solar powered applications. A shielded power/pulse output cable with DIN connection is included with the magnetic flow meter. The industrial electromagnetic flow meters' display housing is fitted with tamper-evident features.

The display units of the standard WMX magnetic flow meter models listed below are in US Gallons and cannot be changed in the field. However, you may request one of the following available flow meter displays: Rate: MGD, CFM, Liters/Minute; Total: Cubic Feet, Cubic Meters, Megaliters.

Applications: Municipal and industrial water/wastewater, cooling tower water treatment, well usage reporting, and more.

SPECIFICATIONS
Pipe Sizes: 4", 6", 8", 10"
Flow Range:
• 4" 12-500 GPM
• 6" 32-1200 GPM
• 8" 60-2200 GPM
• 10" 95-3500 GPM

Flanges: AWWA 150 lb. drilling
Pressure: 150 PSI working pressure
Temperature Range: 10º F to 130º F (-12º C to 55º C)
Accuracy: +1% at 100% to 10% of reading; +2% at 10% of reading to cut off

Materials:
Body: Welded steel, epoxy powder coated
Liner: HDPE
Electronics Housing: Die cast aluminum, powder coated
Electrodes: 316 stainless steel

Rate Display: 6-digits in units of GPM (standard), MGD, Liters/minute, CFM
Totalizer Display: 8-digits in units of Gallons x 1000, CU Feet, CU Meters, Megaliters

Power:
101: 12-24 VDC, 30 mA
104: 2 Lithium 3.6V “D” batteries, replaceable, 3 year life
Output Signal: Current sinking pulse, opto-isolated, 24 VDC, 10 mA max
Empty Pipe Detection: Hardware/software, conductivity-based
Environmental: NEMA 4X standard, (optional short-term immersible)

Ordering Information:

Magnetic Flow Meters Options
WMX101-400 4" Magnetic Flow Meter
WMX101-600 6" Magnetic Flow Meter
WMX101-800 8" Magnetic Flow Meter
WMX101-1000 10" Magnetic Flow Meter.

Battery Operated Magnetic Flow Meters
WMX104-400 4" Magnetic Flow Meter, Battery
WMX104-600 6" Magnetic Flow Meter, Battery
WMX104-800 8" Magnetic Flow Meter, Battery
WMX104-1000 10" Magnetic Flow Meter, Battery

NOTE: The Magnetic Flow Meters listed above are in units of US gallons and cannot be changed in the field. Other display units such as MGD, CFM and Liters/minute are available. Please specify rate and totaliser display units when you order.

Accessories
FT420W Pulse to 4-20 mA Output and Wall Mounted Display
AO55W Blind 4-20 mA Converter and Wall Mounted Display